Visible Damage

There are visible signs that may indicate that your generator is damaged—for instance, worn-out wires, buttons, and loose parts, among other components. Ignoring such issues will only lead to more problems down the road.

Visible damage to the exterior of a generator can be caused by a hurricane or even troublesome outdoor pests. Additionally, corrosion and dents on the outer parts of your generator might be signs of deterioration.

However, a generac dealer in Northeastern North Carolina and Southeastern Virginia, can inspect your generator at least once after every six months. Proper maintenance will ensure that your generator runs efficiently and stay in good condition.

Trouble Starting

It can be frustrating when the grid power goes out and your generac power system fails to start.

There are several reasons why this may happen. For instance, the fuel may run out. It could also mean that the generator is working with old fuel. The only way to solve this issue is by replacing the fuel filter.

A company that deals with generator installation can help you replace fuel filters when needed. Other components might also need an inspection to determine why your generator is not running.

Inconsistent Power Supply

Inconsistent or unstable power supply by a generator can damage your electrical appliances.

Unstable voltage can occur when the engine or the power generator has problems. Some of the problems with the engine that can cause power fluctuation include;

Unstable Engine Speed

You can try to pay attention to your engine when it is operating? When the engine produces an unusual sound, it may be a clear indication of unstable engine rotation. A normal rotation speed of a generator engine should be 1500 amp.

Unstable engine rotation can be due to dirty or clogged fuel. Failures with the fuel regulator can also cause the generator engine to be unstable. However, generac dealer Northeastern North Carolina and Southeastern Virginia can help you check the engine fuel and ensure it is clean.

Issues With Generator Output Cable

You also need to constantly check the output cable and ensure it is in good condition.

If the cable is peeling or leaking, it may disrupt the voltage output. Thus, you need to measure the resistance of cable insulation and make sure it is still in good condition.

A loose cable terminal can also cause power fluctuation. Thus, you must ensure the cable terminals on the engine are properly installed.

Problem With AVR Generator

AVR is the main component is a generator that regulates the voltage. If the above components are in good condition, then the unstable voltage could be due to issues with the AVR set.

When the AVR has been damaged, you may experience unstable voltage. AVR setting can, however, correct the issue, but if it is damaged, the best solution is to replace it with a new one.

Failure to Produce Any Electricity

This problem can occur when your generator’s breakers malfunction. Loss of residual magnetism in the alternator or failed AVR can also cause power production failures. Poor connections, defective breakers, and capacitors can also hinder power transfer from your generator.

Thus, it would be best to consider hiring a trusted generac dealer in North Carolina to help you solve the problem. They will be able to test your generator and determine where the problem lies.

Internal or External Leak

Your generator can experience fuel, coolant, or oil leaks.

Fuel leaks occur when the base tank is overfilled. It happens when the fuels pump system malfunctions or due to human errors. On the other hand, coolant leaks when block heater hoses wear out due to high temperatures generated.

Leaks can cause your generator to fail to start, especially when you don’t use it regularly. However, the problem can be solved by performing regular maintenance checks. Generac dealer Northeastern North Carolina and Southeastern Virginia, you can keep you inspect your generator for any issues that may lower its performance.

Control Malfunction

Generators have a control panel that you can adjust in setting.

The control displays crucial information such as oil pressure, battery voltage, and coolant temperatures. If the system malfunction, the power supply is hindered.

However, a skilled technician can help you fix the issue fast.

Block Heater Wear

This component is responsible for warming coolant. Oil flows through the engine block and keeps it heated. This, in turn, prevents oil from thickening.

Block heaters are thus essential in ensuring that the generator experiences minimal wear and tear. Since this component runs constantly, it eventually fails, and replacement is needed.

Hire Generac Dealer for Your Generator Repair Maintenance

You won’t notice when your generator has possible issues because you don’t run it regularly. Though most modern generators may notify you when they have a problem, you will thus need to hire a generac dealer to do regular maintenance and repairs.

Are you wondering, "Where can I find a generac dealer near me?"

Vancelectric is a licensed and insured company you can trust with generator installation and repair maintenance in Northeastern North Carolina and Southeastern Virginia. We have skilled technicians who will perform any installations and repairs.

Contact us today to get a free quote.